Split cylindrical roller bearings

Giá: Liên Hệ

     Special features
  • - Every main component has two halves.
  • - Outer ring and inner ring has angled joints to ensure continuity of contact with rollers.
  • - Two halves of inner ring are fully fitted on shaft by two clamping rings
  • - When fitting two halves of inner ring on shaft, there should be a gap at the joint in order to ensure full contact between the bore of inner ring and shaft. The gaps differ from the sizes, 0.35mm to 0.55mm
  • - We use auto-locking cage, made of aluminum or brass steel clips attached in each halves of cage enable self-locking.
  • - For fitting in misalignment positions, blocks are separated into two parts, housing and support. The joint surface between housing and support are rounded in order for self ailgning.

  • Radial internal clearance



Sản Phẩm Thường Được Xem Cùng